News

News / article

New printers

2026. 09. 15.

Quantum Cyber Completes an 80-Printer “Drone Farm” in Connecticut

1 min read

Quantum Cyber has completed installation of an 80-machine 3D printing farm in Connecticut, targeting drone components and related production work.

Quantum Cyber has completed installation of an 80-machine 3D printing farm in Connecticut, targeting drone components and related production work.

What happened?

Quantum Cyber has completed installation of an 80-machine 3D printing farm in Connecticut, targeting drone components and related production work.

Key details

The installation consists of 80 3D printers.
The project targets scalable drone-related manufacturing.
The print-farm model creates flexible capacity through many parallel machines.
Capacity can be expanded incrementally by adding additional printers.

Why it matters

Print farms show that desktop and mid-range machines are not limited to hobby use. With proper workflow management, many identical printers can operate as a flexible modular production cell.

The cover image is a 3DPS-created illustration.

Source and further information

This article is a summary based on publicly available source material. Read the original here: 3DPrint.com.

#QuantumCyber #PrintFarm #3DPrintFarm #DroneManufacturing #Drones #UAV #3DPrinting #DistributedManufacturing #DigitalManufacturing #Production #Automation #3DPS

2026. 10. 06.

Mosaic Orion: Belt 3D Printing for Automated Custom Orthotics

Mosaic’s new Orion system continuously manufactures custom foot orthotics, running different patient jobs one after another without conventional manual batching.

2026. 10. 05.

Lightmake L4: Four Fully Independent Toolheads in a Kickstarter Printer

The Lightmake L4 combines four independent toolheads with a linear-motor motion system to reduce multi-material waste and cycle time.

2026. 10. 04.

QIDI Smart 5: a compact CoreXY revealed by FCC filings

FCC documents reveal a 180×180×180 mm QIDI Smart 5 for PLA/PETG, with a claimed maximum speed of 600 mm/s.

2026. 10. 03.

Stratasys F870: One-Meter Industrial FDM Already in Toyota and Rivian Workflows

Stratasys’ new F870 combines a 1000 × 610 × 610 mm heated build chamber, Nylon 12CF support and a focus on production tooling, fixtures and factory aids.

Earlier news

79 earlier article(s)

CXMT RAM: China Closes the Memory Gap from DDR5 to LPDDR6

2026. 09. 10.

Technology

CXMT RAM: China Closes the Memory Gap from DDR5 to LPDDR6

China’s ChangXin Memory Technologies (CXMT) is becoming a serious DRAM competitor: its DDR5 memory is appearing in desktop and server systems, while in September 2026 the company also announced mass production of LPDDR6.

Read

SUNLU Moves Toward an IPO as China’s Filament Market Expands Rapidly

2026. 09. 10.

New materials

SUNLU Moves Toward an IPO as China’s Filament Market Expands Rapidly

Chinese materials manufacturer SUNLU more than doubled its first-half revenue year on year in 2026 while progressing toward a listing on Shenzhen’s ChiNext market.

Read

Beyond the Machines in Shenzhen: 3D Printing Moves Toward AI, Footwear and Consumer Electronics

2026. 09. 10.

Software / AI

Beyond the Machines in Shenzhen: 3D Printing Moves Toward AI, Footwear and Consumer Electronics

One of the most important takeaways from Formnext Asia Shenzhen 2026 was that additive manufacturing is spreading into industries that previously paid it far less attention – from AI-based 3D modelling and data-centre cooling to consumer electronics.

Read

Formnext Asia Shenzhen 2026 Breaks Attendance Records as Asia’s 3D Printing Market Accelerates

2026. 09. 10.

Software / AI

Formnext Asia Shenzhen 2026 Breaks Attendance Records as Asia’s 3D Printing Market Accelerates

Formnext Asia Shenzhen 2026 welcomed 34,202 visitors while international attendance jumped 157 percent. The figures underline how quickly China and the wider Asian region are becoming one of the key centres of additive manufacturing.

Read

3devo Filament Maker X10 Targets Up to 1.5 kg of Custom Filament per Hour

2026. 09. 09.

New materials

3devo Filament Maker X10 Targets Up to 1.5 kg of Custom Filament per Hour

Dutch manufacturer 3devo has introduced the Filament Maker X10, targeting the gap between laboratory development and small-scale filament production. The company says the system can produce up to 1.5 kg of filament per hour.

Read

2026. 08. 24.

Technology

KPI features have been added.

KPI features have been added. CALIBRA – Measurem Why do KPIs matter in measurement equipment management? Because data becomes truly useful only when it helps you see where attention is needed and how performance changes over time.

Read

CALIBRA – A Free Measurement Equipment Management System Is Under Development

2026. 08. 11.

Technology

CALIBRA – A Free Measurement Equipment Management System Is Under Development

CALIBRA – A Free Measurement Equipment Management System Is Under Development A new in-house developed web application is joining the growing collection of 3DPS projects. CALIBRA is being developed as a modern, transparent and expandable measurement equipment and calibration management system. Development has progressed rapidly from the original concept to an already functioning web application, with the foundations of company management, equipment tracking, external partner management and auditing now in place.

Read

Parkside Multi Charger: Controller Architecture for the Basic and Pro Versions

2026. 08. 04.

Technology

Parkside Multi Charger: Controller Architecture for the Basic and Pro Versions

Parkside Multi Charger: Controller Architecture for the Basic and Pro Versions Development of the Parkside Multi Charger has entered a new stage. During the latest planning phase, several controller and power-switching architectures were compared to find a solution that keeps the Basic version easy to build while leaving enough room for the more advanced Pro model.

Read

Parkside Multi Charger – New Development Milestone

2026. 08. 02.

Technology

Parkside Multi Charger – New Development Milestone

Parkside Multi Charger – New Development Milestone Development of the Parkside Multi Charger continues to make steady progress. Recent work has focused not only on hardware and software development but also on establishing the project's public identity and communication. The project currently consists of two separate development branches: Parkside Multi Charger (Normal) and Parkside Multi Charger Pro.

Read

Anycubic Kobra 3 toolhead – successful firmware backup and the first steps toward a CAN-based Klipper toolboard

2026. 07. 27.

New printers

Anycubic Kobra 3 toolhead – successful firmware backup and the first steps toward a CAN-based Klipper toolboard

Anycubic Kobra 3 Toolhead Project – Another Milestone: Successful Firmware Backup and Preparing for a CAN-Based Toolboard Today marked another major milestone in the Anycubic Kobra 3 Toolhead project. Our objective is not to modify or preserve the original firmware. Instead, we are developing a completely custom firmware that will transform the factory controller board into a Klipper-compatible CAN Tool MCU with only minimal hardware modifications.

Read